Businesses Cash In When Adopting BYOD Strategies

Businesses seek the most cost-effective technologies to streamline operations while cutting expenses without cutting down on productivity. One such technology that has been placed under the microscope is bring-your-own-device, or BYOD.

In today's world, employees will utilize the best methods to get the job done, even if the company doesn't supply those methods outright. Employees have been investing in their own devices such laptops, tablets and smart phones to use in the office. Many businesses have noticed such a growing trend, deciding to use this technology to their advantage while appeasing employees who are better able to handle their workload by using their own personal device.

Why BYOD Has Become Profitable For Companies

According to IT Inflections, over 89 percent of employees use some type of mobile device for work with 65 percent of them opting to use their smartphone the most often. By looking at these numbers, it is no wonder why companies are trying to allow employees to use their mobile devices at work. Yet cost-savings goes beyond the number of employees using BYOD.

Employees Purchase Their Own Equipment

For every employee that uses their own smartphone for work purposes, that is one less piece of equipment that the company has to buy. In addition, employees are not being that cheap about their smartphone purchases.

Many analysts say that the amount of money the company saves in purchasing the actual device is offset by the development of mobile gateways and platforms to support BYOD devices. While there are costs, these can be managed when deploying the right BYOD policies and management. The Huffington Post reports that companies who spend no more than $8 per device on BYOD solutions could see a savings of $192,000 a year for 1,000 employees using BYOD.

Increased Productivity Leads To Greater Generated Revenue

It is safe to assume that an employee who enjoys using his own device for work will have an increase in productivity. An internal review by Intel concerning its employees using BOYD devices has shown that 17,000 workers increased their productivity by 57 minutes every day. By figuring out the amount of revenue that was gained by the increase of productivity, such as 10 percent, it could be estimated that an additional $21 million in revenue can be produced annually through BYOD strategies.

Proper Management Of BYOD Is Paramount To Cash In On This Mobile Solution

Even with the amount of savings and additional revenue from increased productivity, BYOD will only be good for the company who seeks out the right management solutions. Companies that stretch themselves out too much to satisfy BYOD employees could see very little savings in return. To not fall into such a trap, keep the following factors in mind.

Limit The Amount Of Platforms To Support

If you try to support every single iOS out there, you will spend more money maintaining and upgrading platform support for every single one. Select the platform you will permit employees to use -- Windows, ChromeOS, Android, Linux, Blackberry -- as you will be able to consolidate your resources for more effective mobile management solutions, according to Tech Republic.

Don't Let Overages Skyrocket Out Of Control

Your company may decide to pay for the data plans for your employees' BYOD smart phones. Yet if you are not careful, you may find your employees going over their data allowance as well as trying to submit their text messaging costs as a business expense. Consider what expenses you want to pay for your company's BYOD strategies so you aren't losing money through overages.

Matt Smith is a Dell employee who writes to help raise awareness on the topic of BYOD Solutions and other network management subjects.

Read More...

How to Make a Website for Beginners

Those unfamiliar with the intricate world of website design will need to brush up on their skills prior to creating a website. Of course, you could pay a professional to do it for you, yet this simple solution is half of the fun. Creating your own will allow you to get it exactly right.

Listed below are various tips, all of which will allow you to create your very own website:

1. Create A Domain Name

Prior to considering anything else, you must choose a domain name. This in a sense is the title in which you wish to give your website. It’s also the name potential customers will see (this only applies to those who intend to build a website for their company or brand). In order to gain a domain, you must register. This registration requires an annual fee.

2. Choose A Web Host

A web host comes in the shape of a corporation that houses various computers; each device is connected to the Internet. You can choose from a big variety of websites offering affordable prices for hosting your website. Once you have decided on a domain name and web host, you must then link the two. Web host is paid for either 6 months, a year or even longer. 

3. Designing Your Own Web Pages

Once you have a host and domain name in place, the next stage requires you to design the actual website. As a beginner, you shouldn't expect perfection the first time round – this comes with time. The fine-tuning can come at a later date; the first and foremost stage requires you to get a webpage up and running.

There are a number of free and commercial web building tools to consider, many of which will aid you in creating a high-quality website. Programs worth looking into include Dreamweaver, or alternatively, set-ups similar to this one. There is also a wide variety of CMSs which you can choose from. However the most popular would be WordPress. Many reputable websites are built with this CMS. After installing it, it will do most of the work for you. It also allows you to install a big variety of useful plugins to improve your page such as social media buttons and search engine optimisation tools.

An important part of web design involves the search engine readiness. Search engine activity should begin during the initial stages of web design as opposed to the end. This will allow for a higher ranking on Google, meaning more Internet users are likely to visit the site in question.

4. Validating Code

If you wish to ensure the successfulness of your newly created website, it may be wise to validate the code for your webpages. In other words, this requires you to check the underlying code of the webpage in question.

Finally ensure that your website runs smoothly when using a number of browsers. It’s important to learn that not everyone uses the same browser and just because your webpage loads in one, this doesn’t mean it will be compatible with all. You must also consider users that surf the web using iPads, tablets, iPhones and various over smartphones. It may be wise to create a separate webpage suited to these mediums. Otherwise, text may appear broken, pictures may be missing and certain images may be too big for the screen. For this it is best that since the beginning you choose a responsive theme. Currently this is a popular choice since so many people are using other devices to surf the web.

Learning how to design your own website is a great way to save money and create exactly what you`ve always wanted. However, if you encounter difficulties or have no time to do that it is always good to hire a web development agency and let them do all the hard work for you. This is especially true if you have a business as opposed to just doing a website for yourself. 

Read More...

The best machineries for powder mixing

The art of mixing

The art of mixing has been in this world for quality a long time. In the past, our ancestors devised the art of mixing substances and breaking those in two pieces for better use. Then people learned the art of making powder for the best utilizations of the products. The mixing of dough powder for food and the grinding of stones for roads are some of the examples of powder mixing in the past. After that, things got commercialized when the industrial revolution started and everything got its value. Companies emerged to provide power mixtures and machines that provide those mixtures.

Powder processing

Now at the current time, there are many companies all over the world that provide powder processing services and products to the people and industries all round the globe. Among these companies, the finest in this business is Hosokawa Micron B.V that has been in this business for a long time and has been very successful all over the world. There are several products and machines that Hosokawa Micron B.V provides to the industries and customers all over the world and also Hosokawa Micron B.V is very widespread among the people and the industries all round the globe as their demands and the demands of their products are increasing every day.

Hosokawa Micron B.V

The products and machines that Hosokawa Micron B.V provides are used in the food industry, pharma industry, chemical industry, mineral and metal industry etc. There are varieties of uses of these products and there are products and services that the company provides are mixing, drying, agglomeration, system solutions, powder processing, ancillaries, lab equipment, used equipment etc. There are also several types of services that Hosokawa Micron B.V provides in the sector of powder processing and some of the services are spare part services, repair and maintenance, preventive maintenance, upgrading and refurbishment, used equipments etc. These services are very much important for the industries all over the world and that is why these services are so popular among the people all over the world.

Products and services

The number of companies and customers using these services provided by Hosokawa Micron B.V is increasing every day and that is why there are many branches of Hosokawa Micron B.V all over the world and it is one of the largest producers of powder processing products all over the world and has been very successful since its commencement. There are several powder solutions that the company provides such as mixing equipment, powder mixing, industrial dryers, agglomeration, wet granulation, nauta mixer, vacuum drying, powder processing, powder processing machinery etc. There are also several brands of the company such as Alpine, Bepex, Micron, Schugi, Vrieco Nauta etc. These are the reasons why Hosokawa Micron B.V is so famous among the industries all over the world and the client base of the company has been increasing drastically every year as the company has been providing some of the best and quality powder mixing products and services to the customers all over the world.

Read More...

How High Temperature Furnaces' Are Made? - The Production Process

Source: Thomas's Pics, cc-by-3.0, flickr

A furnace is generally an object made with the sole purpose of producing heat at high temperatures for various uses. It may for instance be used for warming houses and workplaces in times when the temperatures are usually extremely low. It is also used for commercial purposes like melting metals to convert them into more useful models and shapes. A lot of work is however put into the production of a furnace. Here is a comprehensive furnace resource about the whole furnace production process.

The Production process

A furnace is used to produce and hold the heat of extremely high temperatures. One may thus wonder what the furnace is made of if the temperature of heat it holds is adequate to melt a lot of hard metal and other materials. It is mostly made from materials like fiberglass, aluminized steel, stainless steel and aluminum among others. After a furnace is made to the very last detail, it is put through a series of tests to establish its strength. This is necessary since being the heat it produces and holds to leak out, it would be uncontrollable and very destructive, deadly even.

How does a furnace do what it does?

One would wonder just how such high temperature end up being produced in the first place and being held in the furnace. All are however, addressed in the comprehensive furnace resource, here is a look. A furnace is made of several compartments. It is, for instance, made of the heat exchanger, another secondary type of heat exchanger based on the furnace’s rating, burner, a gas control valve, an air-circulation blower, a pilot light, an external thermostat and a flue draft blower.

The process of heating depends on all of these compartments. When the thermostat signals for the hat, the burner’s light as well as to deliver the heat into the main heat exchanger. A hot air is then delivered to a secondary heat-exchanger and then into the exhaust flue which is meant to accelerate the burners as well as to increase the level of heat produced, and the intended destination in the long run.

The material utilised in the process of furnace production does quite a great work in preventing fire leakage. Some heat will however escape during the process when the furnace is at work. Depending on its quality, an ordinary and modern furnace will let out about 10 to 20% of heat into the air.

An average furnace come with three different heat exchangers and each of them produces about 25,000 BTU, making the total BTU 75,000 at the end of it all. That is sufficient to perform most of the common tasks like melting metal. The work of the heat exchangers is to transfer the heated air from a furnace to its intended location and also to eliminate any dangerous exhaust fumes in the process.

While the production of furnaces has gone on for quite some time, they still have faults, which bring some discomfort to some degree during operation. Manufacturers however, have their eyes set on first enhancing the furnaces’ capabilities and minimizing its faults.

Industrial Heating Equipment Association (IHEA) has come up with some rules and regulations in order to minimize the faults in the furnaces'. Dowa Hightemp Vietnam is one of the companies which follow the rules and regulations of IHEA.

Read More...

How Business Owners Can Use Direct Mail to Bring In New Customers and Grow their Business

Despite the fact that a lot of focus has shifted over to the Internet in the last few years, direct mail marketing is still one of the most effective ways to market your business. There are many naysayers that underestimate the effectiveness of this marketing channel but there’s a large opportunity due to the fact that there is less competition in direct mail these days. Making the channel work is all a matter of using the right strategy. Here are some tips to help you succeed with direct mail.

1. Pick the Right List – The one thing that hurts more businesses than anything else is the list. This is one of the few direct mail solutions you need to get right before you even think about developing and launching your direct mail marketing campaign. You need to rent a list that has your audience and one in which your audience is actually buying from other businesses.

2. Go for Leads – The key to making direct response campaigns work is to have a call to action. While trying to get your prospect to purchase straight from the letter can work, you may get more mileage out of generating a lead. The reason why getting the lead can be more profitable is because you can follow up with the leads to try to close sales. When you ask for a direct sale, you are limiting yourself to only one contact.

3. Use Your Own Database – Most businesses have a hidden goldmine under their very nose. They have a list of customers that they haven’t contacted in months, maybe even years. Your database will probably be more valuable than a rented list because you’re dealing with people that have already done business with you. The only time using your own database may not work is if you haven’t contacted them in a very long time. Even then, a customer reactivation campaign can bring help you access the customers that are still interested in what your business.

4. Combine Multiple Channels – Many businesses have reported great results combining Internet marketing with direct mail. They get the lead online then proceed to follow up via email/social media and direct mail at the same time. With this strategy, it is possible to boost the effectiveness of your Internet campaign and bring in more sales you normally wouldn’t have using the Internet alone. It’s just a matter of integrating campaigns where you announce your mail to your online leads before they get it.

5. Use Effective Advertising Copy – Businesses that are just starting out with direct mail usually have trouble with writing the actual ad or letter. The skill of copywriting is definitely not easy to master. It may be beneficial to hire an advertising copywriter that specializes in direct mail campaigns. It can cost you quite a bit but it’s an investment that will pay off in the long run.

Direct mail can be very effective and can really open up a profitable revenue stream for your business. If you need some assistance, there are companies out there that offer direct mail solutions to help you increase the effectiveness of your campaigns and make your life easier. It is far better to seek help from professionals that have the expertise and experience in this channel than experimenting with your advertising budget.

Read More...

Make the Most of Your Business Emails | Email Stationery

Over the year, emails have become an integral part of business communications. Businesses of all sizes use emails to contact everyone from internal staff members within the organisation through to other agencies and customers. However, what some companies fail to realise is just how effective their outgoing emails could be if utilised correctly.

Technology is Given Not a Debate

Many firms send out huge numbers of emails on a daily basis, but these are simple plain emails with nothing more than their name and perhaps their job title at the bottom. Unfortunately, while this is the format that many companies are used to when it comes to their emails it does nothing to help promote their business. When you consider the large numbers of emails that some companies send out, this is actually a wasted marketing opportunity for the business.

How email stationery can help

One way in which your business can make the most of marketing opportunities via email is through the use of the right email stationery. This is something that can enable you to turn every single email that goes out into a marketing opportunity. 

When you use the right email stationery for your outbound mails, you will be able to benefit in numerous ways. This includes:

• Make people aware of your services: Using the right email stationery means that you can make people who are receiving your emails aware of the goods and services you offer. This means significantly increased visibility for your business.
• Make your emails stand out: The right email stationery will make your outgoing emails stand out more, making them more eye-catching and increasing the likelihood of the recipients taking notice of them.
• Increased chance of being forwarded: Using eye-catching and interesting email stationery means that you can boost the chances of your outbound emails being forwarded by others, which means that more people will get to find out about your goods and services. 
• Increased traffic and revenues: The ultimate advantage of using the right email stationery is that it can help to increase website traffic, which in turn means that it can help you boost your sales and revenues. 

In short, email stationery is a simple form of marketing your business, which you can engage in on a daily basis – each time you send out an email. All you need to do is select the most appropriate stationery for your business needs. 

Read More...

Obstacles to Entrepreneurial Success and How to Defeat Them

Pinterest

The path of the entrepreneur is never easy; in fact, it is most certainly one of the most challenging vocations a person could take. Being employed is by far, the easier way to go. It is a known fact that a majority of venture capital-backed startups fail to meet their projected goals or ROIs.

VC-backed endeavors are by no means blind gambles, and the venture capitalists themselves didn’t get to be flush with funds by throwing good money after bad, either. This tells you that even the most well-thought out and researched startups are still easy prey to the whims of the marketplace.

The following are some of the most formidable obstacles to a startup’s success, and along with them, some ways of effectively mitigating or even eliminating these hindrances totally:

Insufficient Resources

While some ventures are fortunate enough to get sufficient funding for their planned projects (including expansion), it rarely is the case with many other entrepreneurial endeavors. Many ambitious and elaborate strategies are curtailed by the reality of insufficient funding, and what could have been a great idea would just become another note in the back burner, waiting for the availability of resources to implement it.

If all the math has been done and the plan has yielded a theoretical bottom line that meets the expectations of the stakeholders, then this worthwhile project should be given the lifeblood it needs to start.

The stories of companies borne out of numerous little loans from friends and relatives (and the occasional angel investor, if one is lucky) are real, and many a small and promising company has had its beginnings in such humble circumstances. Services like Dealstruck have also emerged to offer small companies the money they sorely need, especially when the banks won’t give them the time of day.

Inhospitable Economic Climate

While one could have a great idea to start a company with, the economic situation could prove to be difficult and make execution difficult or even impossible. Massive economic upheavals in recent history like the dotcom and housing bubbles created an environment in which businesses could not get the money it needs to start or expand, or render the market unwelcoming to their products and services, especially if they do not meet the more basic needs.

In cases like this, patience and/or adaptability will come into play. One choice could be to just wait it out and make the startup happen during a better time in the future, but there is no guarantee that the opportunity will be available again. The very same ideas can take root in two different people, and someone else might beat you to the punch. A change of plans could also be done in order to make starting up require considerably less capital (not an easy task in the least), or tailor-fit the product or service to the current economic situation.

Monolithic Competition

In most cases, there will be pre-existing companies who are already well-entrenched and established in name and reputation. There’s no going around the reality that there are bigger, better-funded outfits who are not going to wear kid gloves around the competition.

Like the biblical David, smaller companies have the advantage of being more flexible than the gigantic Goliath. They can easily change direction, and take their pick of targets to focus on instead of encompassing the entire market as bigger companies do. Pick your battles, stay adaptable, and do not lose sight of the company’s goals, and the little startup might just grow into something that can take the old titans on (think Google).

Onward, brave and ambitious entrepreneurs!

About the Author

Stacey Thompson is a professional writer, marketer, entrepreneur, and a lover of weird little animals. She is based in San Diego, California, and shares a blog with her closest friends, Word Baristas.

Read More...